Control Arm & Ball Joint Front Lower Pair Of 2 For Chrysler Dodge Plymouth

TRQ Control Arm & Ball Joint Front Lower Pair of 2 for Plymouth Chrysler Dodge Set Quantity : 2 Piece Steering and Suspension Features & Benefits : Direct fit - easy install, pre-greased, no maintenance required Improved ride comfort and longer life No modifications, all the parts needed in 1 kit This replacement front lower control arm PAIR is just what you need to bring back the safety and integrity of your vehicle's suspension and steering. Specifications: Comes as a PAIR Fits both the LH (Driver Side) & RH (Passenger Side) FRONT LOWER Replaces dealer part numbers: 4616923, 4764501AC, 4764501AE, 4616922, 4764500AC, 4764500AE Includes new ball joint and bushings Control arm is new, not remanufactured or refurbished Does NOT fit Coupe Models Worn ball joints or loose rear bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace thatheavily rusted, rotted, or damaged front lower control arm with the loose bushings or worn ball joints with our high quality all in 1 replacement. 1 way to diagnose a loose, or warn ball joint on a control arm, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are movingthe wheel check the ball joint and bushings for play, if it is moving you probably need to replace it. Lifetime Warranty This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.This warranty covers the cost of the part only. Attention California Customers: WARNING:   This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm..  For more information, go to www.P65Warnings.ca.gov. Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed. Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions. Fits : 1995-00 Chrysler Cirrus Front Lower Control Arm with Ball Joint Set 1996-06 Chrysler Sebring Convertible Front Lower Control Arm with Ball Joint Set 1996-06 Chrysler Sebring Sedan Front Lower Control Arm with Ball Joint Set 2001-06 Dodge Stratus Sedan Front Lower Control Arm with Ball Joint Set 1995-00 Dodge Stratus Front Lower Control Arm with Ball Joint Set 1996-00 Plymouth Breeze Front Lower Control Arm with Ball Joint Set